The CO2 sensor is a sensor for a wide range of applications. In combination with eg. MultiController it could be used for full control of ventilation in a single room and/or as CO2 sensor in more complicated ventilation systems.
The CO2 sensor is provided with a 0-10V proportional output based on the current CO2 level to be used as input signal for the controller of a damper or ventilation plant.
Both design and ease-of-use have been prioritised.
In combination with our 24V DC power supply type PowerSupply 0.1-24E with integrated setpoint relay a very easy implemented on/off operation is achieved. For more fine-tuned regulation LS Control recommend using the MultiController E Regulate or MultiController E 0-100%.
CO2 Sensor Basic uses the widely used ABC algorithm, which ensures long life without calibration. Only the room cannot be used constantly, but must regularly get sufficient airflow to lower the CO2 to fresh air level.
| EAN-Number | 5703471483307 |
|---|---|
| Size (HxWxD) | 85x85x35 mm |
| Enclosure | IP 32 |
| Supply Voltage | 24 VAC |
| Alternate Supply | 24 VDC |
| Ambient temperature | 10 - 50 °C |
| Precision Sensor | ±50ppm ved 500ppm |
| Measurement Area | 0 - 2.000 ppm |
| 0-10V Output Current | 15 mA |
“If you have any questions or need assistance choosing from or using our products, you are welcome to contact customer service:”
Since 1969, we have supplied electronics for management, regulation and control to quality-conscious companies
Receive our newsletter about 4 times a year with information about what is happening with us and in the market.
LS Control A/S | Copyright © 2022 All rights reserved.
